Manual wire feed welding 200 Amp

Manual wire feed welding 200 Amp
Description
Manual wire feed welding ( 2-Stap)
Protects against overloading
Equipped with Euro connection
4 Welding programs
Technical data:
- Power supply ( Volt 50-60HZ ) 1 Ph x 230
- Fuse ( AMP ): 20A
- Weight: 14.6Kg
- Dimensions ( L x W x H ): 555 x 276 x 425mmL
- Welding range:
- MIG / No Gas: 10 - 200A
- MMA: 10 - 160A
- TIG: 10 - 200A
- Work cycle:
- MIG / No Gas: (180A - 25% ) - (100A - 60%)
- MMA: (150A - 25%) - (100A - 60%)
- TIG: (180A - 25%) - (100A - 60%)
- Zero load voltage ( Volt ) : 86V
- Coil: 200 - 300mm
Wire MIG MAN/SYN:
- Steel: diameter 0.6 - 0.8 - 0.9 - 1.0mm
- Stainless steel: diameter 0.8 - 1.0mm
- Aluminum MG wire: diameter 0.8 - 1.0 - 1.2mm
- Aluminum Si wire: diameter 0.8 - 1.0 - 1.2mm
- CuSi 3 wire: diameter 0.8 - 1.0mm
- CuSi 8 wire: diameter 0.8 - 1.0mm
- Shielded wire: diameter 0.8 - 0.9 - 1.0 - 1.2mm
Electrodes:
- Power supply ( Volt 50-60HZ ) 1 Ph x 230
- Installation power: 5KW
- Fuse (AMP): 20A
- 2-step wire feeding
- Euro clutch
- Cable: 25mm²
- Rutile: diameter 1.6 - 4.0mm
- Basic welding electrodes: diameter 2.0 - 4.0mm
- TIG torch electrode: diameter 0.5 - 2.4mm