Protective cap for chuck 400mm

Protective cap for chuck 400mm
Chuck guard for lathes with steel frame.
Features:
Third generation safety guard for chucks "Made in EU".
Equipped with a steel frame. 
Thermoformed screen in shockproof and oil resistant material. 
Protects the operator from direct contact with the upper part of the chuck and from splashing lubricant - coolant.
Equipped with a microswitch n.2 NC contacts, is a positive contact as described in EN 60947-5-1. 
The only one that can be positioned up to the machine head. 
Suitable for:
conventional lathes, universally applicable
Delivered with:
CE mark
CE certificate
Instruction / assembly manual
Attention: a chuck shield always requires adjustments to mount on your lathe. A safety guard must be installed by qualified personnel. The estimated working time is about 2 hours, provided there is an emergency stop circuit. If you have any questions or if you want to install the circuit, you can always contact our technical service. 
Tip: When choosing the size of the chuck guard, you must take into account the turning diameter above the bed and the safety of the operator.
A mm 400
W mm 235
Slot depth mm 230
D mm 0-150
Weight kg 4.10

Contact:
Tel:0031-111-795029
Whatsapp:+31-111 79 50 29
eMail:Klantenservice@Xenon2Go.Com