Manual vertical crosscut saw diameter 315mm

Manual vertical crosscut saw diameter 315mm
Manual, stepwise crosscut saw with vertical dovetail guide with saw blade diameter 315 mm, "Made in EU".
Trumps:
Slow rotating - 17 / 34 rpm
Vertical conduction over dovetail
Gear transmission via worm and worm gear, running in an oil bath 
Coolant beam distribution for better lubrication of the saw blade
Suitable for:
Sawing stainless steel profiles and pipes, if customized special saw blade to be used.
Additional information:
Rotating saw head and clamping clamp 45° left to 45° right
Table with fixed end stops at -45°, 0°, +45°, +60° for quick adjustment
Cutting depth stop, both highest point and lowest point can be set, time saving
Equipped with brass gear against breakage in case of overload 
Clamping brush for cleaning the saw blade
Also available in semi-automatic version with saw blade 315 or 350 mm
Safeties:
Saw blade guard for optimum safety when sawing 
Electric 24 V low voltage control, overload thermals
Lockable main switch
Separate emergency stop
Standard with :
Cooling system
Pedestal
Material support roller
Operating keys
Length stop 500 mm
Dutch manual, inscriptions, CE marking, and CE certificate according to Machine Directive 2006/42/CE, and EMC Directive 2014/30/CE
Tip: are delivered without sawblade, do not forget to order. You should also take into account the toothing of the saw blade and the chip remover on the machine.
Voltage V 3x400
Saw blade diameter x bore x thickness mm 315x2.5x32
Saw blade diameter mm 315
Power kW 1.3-1.8
Cutting speed min-1 17/34
Aperture clamp mm 160
Working height mm 910
Weight kg 270.00
Dimensions (l x w x h) mm 1,500x650x1,700