Hot air blower on propane gas 30kw
Portable hot air blower 30kW on propane with built-in fan.
ERP approved model, suitable for indoor use.
Advantages:
Approved for use within buildings (ERP directive EU 2015/1188)
Complete and efficient combustion, in accordance with the European ERP directive
Low emissions of only 122 mg/Kwh NOx
Large air flow of 1000m³/hour, for quickly heating large spaces
Ideal for use on construction sites, sheds, agriculture, events, workshops, etc.
Complete combustion thanks to fine regulation of the oxygen supply
Protection against overheating, gas cut, power cut, tip over
Characteristics:
Professional model with ERP inspection, necessary for indoor gas heaters
Thanks to the large air flow, this heater is suitable for heating rooms up to 1700 m³, depending on the insulation and ventilation of the room. The better the insulation value of the building elements (lower K-value), the larger the space you can heat.
Maximum heatable volume of 930m³, at a K-value of 0.5: in case the building is well insulated according to recent building standards.
Minimum heatable volume of 180m³, with a K-value of 2.5: in case the building is not insulated, with single glazing, full stone walls, roof with old corrugated sheets, or for areas where gates are regularly open.
Complete combustion thanks to fine regulation of the oxygen supply
Suitable for professional use in areas with sufficient ventilation
Rotary knob with adjustable temperature level, not thermostatic
Piezo ignition of the pilot flame. When igniting, the gas button is pressed at the same time as the piezo ignition button, which provides the spark and lights the pilot flame. The high-quality piezo element has a long lifespan and requires no maintenance.
Protection against overheating, gas cut, power cut, tip over
Portable with sturdy handle
CE approved
Delivered with:
Shell regulator for gas bottles with male thread
1.5 m gas hose
Remark:
Ventilation is necessary with this heater. Ensure sufficient ventilation to prevent oxygen deficiency or poisoning from combustion gases and carbon monoxide.
Do not use the heater in closed spaces and in homes. It is recommended to preventively install a carbon monoxide sensor in the room where you use the heater.
This device works optimally with Propane (LPG). A gas regulator for propane is included. Butane is suitable at temperatures above freezing (relaxer not included)
Heat output kW/h 30
Heat type Ventilated air
Energy source Propane gas
Fuel type G30
Fuel consumption kg/h 1.30 - 2.18
Air flow m³/h 1000
Heated space m³ 340-1700
Voltage V 230
Frequency Hz 50
Thermostat Does not have the feature
Adjustable angle of heat Does not have the feature
Hose and regulator included Own the property
Overheating Protection Have the feature
Shutdown in case of power outage Own the property
Weight kg 6.30
Dimensions (l x b x h) mm 475x225x360
