Discharge lamp

Discharge lamp
12+230 volt (AKKU) LED dredging lamp 
This lamp can be operated with 12 volt battery power. Alternatively, the lamp can also be used with the enclosed power supply unit with 230 volts.
Lamp dimension light field: LxWxH 330 mm x 105 mm x 20 mm. Mounting by a 70 mm suction mount of your choice. Yellow + white and optional green can be switched separately.
The lamp has at the back a receptacle for 3 lithium-ion batteries type 18650 PCB, 3.7 V (batteries not included in standard delivery)
The Samsung brand batteries we offer have an output power of 4.2V per battery (12.6V/3)
If you do not use batteries from us:
When buying batteries, be sure to use batteries with overcharge and discharge protection, marked with PCB. Further you should use intelligent digital chargers. These contribute significantly to battery performance and life, but above all, these do not overcharge the batteries!
Standard scope of delivery: Fixation lamp with suction holder, power supply for 230V operation, battery holder for 3 batteries.
Optonal accessories see menu selection
Info about the charger:
Charger for Li-Ion batteries with 120° HD display
intelligent microprocessor controlled charger with four independently working charging bays. 
Via a soft switch the batteries can be charged either with 250mA 500mA or 1000mA.
The device can be operated either with the 230V power supply or 12V car charger cable.
The following Li-Ion battery types can be charged:
Four batteries at a time: 10440 / 14500 / 14650 / 16340 / 16650 / 17500 / 17670 / 18350 / 18500 / 18650 / 18700
Two batteries each at the same time charging slot 1 and 4 : 22650 / 25500 / 26650 / 32650
3,6V and 3,7V Li-Ion batteries
Product information:
- selectable charging voltage of 0.25A, 0.5A, and 1A possible
- Activation function for deep discharged batteries.
-120 ° HD screen, for charging status, voltage and current display
- automatic restart of the charging process when the voltage of a battery remaining in the charger drops below 3.9V.
- reverse polarity and short circuit protection
- over- and undervoltage protection
-Temperature monitoring
Additional information:
When one or two batteries are placed in the middle ( charging slot CH2, CH3) the charging current is selectable from 0.25A to 0.5A for all slots. 
1A charging current is only for the two charging slots CH1 and CH4 (optimal for larger batteries from size 22650 to 32650).
Note for imitators of our products: For this type of lighting we own the protection right at the German Patent Office Munich under the number 20 2012 103 065.9. The marketing of such a product or similar products is not allowed.